No Midi In Signal in Standalone Mode

  • 1
  • Problem
  • Updated 7 months ago
  • 1
Please help me out, i have no midi in Signal in Standalone Mode. Let me explain my Signal path: ERM Multiclock Midi out -> MPC Live Midi in. The Setting is Sync/ Recieve Midi Clock. If i press Start on the Midi Clock, nothing happens, no midi in Signal. If i change to Controller Mode (the MPC Live is connected via USB to my Mac) with the same signal path, everything is working perfekt. Same Cable, Same in and Out Ports. If i switch back to standalone i have no signal. I did a factory reset before, i installed the 2.6 Software again on my MPC Live, same result, no midi in. The MiDi Ports, Cables and the Multiclock are working perfect, because in Controller Mode everything works as it should. Where is my mistake?
Photo of Benjamin Sanker

Benjamin Sanker

  • 1 Post
  • 0 Reply Likes
  • frustrated

Posted 7 months ago

  • 1
7 months ago
Photo of Eliza

Eliza, Employee

  • 3288 Posts
  • 379 Reply Likes
Hey Benjamin,

Thanks for posting!

Sorry to hear that you are having trouble. When you are using the Live in controller mode, are you using the MPC plugin in a host DAW or the standalone MPC software?

The Live will receive transport messages from MMC data. Can you verify that the Multiclock is capable of sending these messages? If so, you should be able to enable the Live to receive MMC messages in Sync Preferences.
  • 1

Powered by Get Satisfaction