Conversations
Conversations 1 - 15 of 603
track length < SEQ length : copy track / bug (?)
if your track length is shorter than the sequence length and you execute the track copy function, the result is not what i expect
i wou...
MPC 2.6 Midi mapping in FL Studio 20
Hello, I am trying to use my MPC live to record midi data into fl studio. I am running the MPC live plug in inside of FL. I have connecte...
MPC Live stops recording immediately after count in while in Midi Synch
I have the MPC Live connected to my Mac with the MPC 2.2.1 software. It sends out the midi clock via midi out of the Scarlett 18i20 2nd g...
Problems with auth Vacuum Pro
I've recently downloaded Loom and got my Serial on the side of the link, registered OK. But can't use the same serial for Vacuum Pro. Sin...
MPC Live Screen flickering
I've noticed my MPC Live screens starts to flicker sometimes. It can happen when the MPC is plugged or unplugged, in Night mode. Has anyb...
MPC Software dithering 24 bit audio to 16 bit in chop mode and 'bounce to sample'
This is an ongoing issue that dates back to 1.x versions of the MPC Software. There are currently two areas where the MPC Software (and s...
Audio track stops producing audio near end of sequence
I have recorded a track of audio that is 16 bars long.
Once it reaches around the 13th bar, the audio of the track drops out until the ...
Akai force switch midi omni mode off
When using an akai force to sequence or even exist on a midi setup with external midi gear the selected track responds to midi messages f...
MPC Live Black screen no functionality.
Recently updated to the latest firmware 2.2. Was using my MPC Live just fine last night, but this morning I was met with this error - htt...
MPC LIVE: All audio cutting out at last measure and always needing to reset modulation at program edit to zero
When recording audio i get 3 samples recorded and then the music cuts out at the last measure. If i lengthen the bars from 4 to 8 I hear ...
MPC Live battery not charging
My MPC Live has stopped charging. It seems to stay on when the official power cord is plugged in, but it hangs at 62%. The yellow charge ...
No Midi In Signal in Standalone Mode
Please help me out, i have no midi in Signal in Standalone Mode. Let me explain my Signal path: ERM Multiclock Midi out -> MPC Live Midi ...
MPC live not loading plugin programs properly from SD card
I've got an MPC Live running 2.6 here. I've been adding some plugin (Tubesynth) sounds to my live set. Everything loads fine if I load th...
switch to song mode from another mode, find yourself back @ step 1
if you have a (longer) song going and need/want to change something in a program or in a sequence
when you do the edit and then switch ...